KTM Hard Equipment rim decals look good and help protect your rims! Please follow the directions carefully. If your rims are already scuffed and have imperfections in the finish, you’ll have them looking new and trick very soon. It is recommended that you install these protective decals with the tire off of the rim. You can install these with the tire on, it will just be more difficult.

Remember, the longer strips are for the front wheels, shorter strips are for the rear. This is not difficult and the strips will easily bend with the curvature of the rim.

Step 1- Clean the surface of the rim with a degreaser or detergent (or both). Completely clean the entire wheel to avoid dirt or grime from dropping onto the rim area during installation.

Step 2- WASH YOUR HANDS

Step 3- Using a clean, lint free paper towel, spray contact cleaner, carburetor cleaner, or brake cleaner onto the towel and clean the surface of the rim. Do not use any cleaner that leaves a residue.

Step 4- Peel the top most strip from the set and stick the tip of the decal to the rim. Hold the tip in place with your thumb and guide the decal into place with your other hand while moving your thumb toward your other hand applying pressure to stick the decal to the rim.

Step 5- repeat 3 more times (4 per rim) and you have it. It may be necessary to cut a portion of the strip on the last pieces installed. This is due to variance in installation.

Step 6- Step back to admire your work!

If you have questions, feel free to call 800-903-6764